Draper 19mm Ball Joint Separator

Forged carbon steel body, plated finish with steel bolt. Jaw opening 19mm, maximum opening capacity 38mm. Length 140mm....

Read on...

Automotive Tools Garage Workshop Tools Steering Suspens Tooled Up
Product
 

Draper Fork Type Long Reach Ball Joint Separator

Forged carbon steel body with plated finish. Jaw opening 19mm and throat depth 70mm. Length: 400mm...

Read on...

Automotive Tools Garage Workshop Tools Steering Suspens Tooled Up
Product
 

Draper Expert N150 Quality Ball Joint Separator

B>I>Expert Quality/I>/B>, forged carbon steel body, plated finish with steel bolt. Adjustable jaw opening 19-21mm, maximum opening capacity 50mm....

Read on...

Automotive Tools Garage Workshop Tools Steering Suspens Tooled Up
Product
 

Draper Expert 3 Piece CV Boots Service Tool Kit

B>I>Expert Quality/I>/B>, for the correct cutting, tensioning and clamping of the CV joint band. Contents:•   200mm precision CV boot band cutters for use on CV bands up to 6mm wide•   225m...

Read on...

Automotive Tools Garage Workshop Tools Steering Suspens Tooled Up
Product
 

Draper Expert Suspension Arm Lever

B>I>Expert Quality/I>/B>, for use on suspension arm and hub work maintenance. Soft grip handle with adjustable hook allows easy use on either side of the vehicle. Adjustable fulcrum gives maximum leverage with minimum effort. Length: 1170mm...

Read on...

Automotive Tools Garage Workshop Tools Steering Suspens Tooled Up
Product
 

Draper Expert TRAT Track Rod Adjusting Tool

B>I>Expert Quality/I>/B>, for loosening and adjusting stubborn track rods. The solid forged steel head and jaws allow more torque for less effort while the large surface area of the serrated jaws help prevent damage to the track rod. For use on 1...

Read on...

Automotive Tools Garage Workshop Tools Steering Suspens Tooled Up
Product
 

Draper CV Boots Tool

This tool allows the user to renew the CV boot of a vehicle without dismantling the CV joint. Manufactured from nylon with a 19mm hexagon bar fitted to the base. Length: 315mm...

Read on...

Automotive Tools Garage Workshop Tools Steering Suspens Tooled Up
Product
 

Draper Track Rod Removal Tool 35mm 45mm

B>I>Expert Quality/I>/B>, for the easy removal and installation of track rod knuckles. Driving end of 1/2" sq. dr. (inner) and 27mm hex. (outer). 360mm hollow internal sleeve length/400mm overall length. Handle knurled for extra grip. Capacity...

Read on...

Automotive Tools Garage Workshop Tools Steering Suspens Tooled Up
Product
 

Draper Track Rod Removal Tool 28mm 35mm

B>I>Expert Quality/I>/B>, for the easy removal and installation of track rod knuckles. Driving end of 1/2" sq. dr. (inner) and 27mm hex. (outer). 360mm hollow internal sleeve length/400mm overall length. Handle knurled for extra grip. Capacity...

Read on...

Automotive Tools Garage Workshop Tools Steering Suspens Tooled Up
Product
 

Draper Expert 2 Stage Ball Joint Separator

B>I>Expert Quality/I>/B>, two stage design for use on most cars and light commercial vehicles. The off set lever provides excellent performance giving a maximum opening capacity 56mm. Manufactured from drop forged carbon steel....

Read on...

Automotive Tools Garage Workshop Tools Steering Suspens Tooled Up
Product
 

Draper 2 piece Coil Spring Compressor Set

Hooks manufactured from tension ductile iron with galvanized finish. 16mm diameter carbon steel screws. Maximum opening 190mm. Length: 250mm...

Read on...

Automotive Tools Garage Workshop Tools Steering Suspens Tooled Up
Product
 

Draper 19mm Capacity Fork Type Ball Joint Separator

Forged carbon steel body with plated finish, with jaw opening 19mm and throat depth 70mm. Length: 200mm...

Read on...

Automotive Tools Garage Workshop Tools Steering Suspens Tooled Up
Product
 

Facom Macpherson Clamp Separator Tool Kit

Features:- Holds open the clamp on vehicles fitted with Macpherson struts- Allows the damper to be easily stripped at the work bench- Fast and efficient- Suitable for all vehicles fitted with removable clamps (Citroen, Peugeot, Fo...

Read on...

Automotive Tools Garage Workshop Tools Steering Suspens Tooled Up
Product
 

Expert by Facom Spring Compressor Set

Features:- Spring compressor with 3 pairs of forks- 435mm length- 300mm compression travel- Maximum power: 10200 N (about 1 ton)- Interchangeable forks with plastic coating to protect springs from damage- 24 mm hex drive...

Read on...

Automotive Tools Garage Workshop Tools Steering Suspens Tooled Up
Product
 

Draper SSK17 Upper Ball Joint Extractor Kit

B>I>Expert Quality/I>/B>, designed for fast and simple removal or installation of upper ball joints when in situ on Volkswagen T4. Supplied in carry-case....

Read on...

Automotive Tools Garage Workshop Tools Steering Suspens Tooled Up
Product
 

Draper SSK16 CV Joint Removal Tool

B>I>Expert Quality/I>/B>, universal tool, compatible with most vehicles. Allows for quick, easy and damage free removal of CV joints from drive shafts....

Read on...

Automotive Tools Garage Workshop Tools Steering Suspens Tooled Up
Product
 

Facom Spring Compressor Universal System

Facom U.89M230 universal spring compressor system with interchangeable forks. Specifications • Compressed Length: 305mm • Extended Length: 540mm • Diameter: 70mm • Travel: 235mm • Screw Size: 13mm • Weight: 14.7k...

Read on...

Automotive Tools Garage Workshop Tools Steering Suspens Tooled Up
Product
 

Draper Rear Axle Suspension Bush Removal Tool for Renault Laguna

B>I>Expert Quality/I>/B>, rear axle suspension bush removal tool, essential for the extraction and replacement of bushes. Can be used on the vehicle when in situ removing the need to detach the sub-frame. Suitable only for Renault Lagunas (2001 o...

Read on...

Automotive Tools Garage Workshop Tools Steering Suspens Tooled Up
Product
 

Draper Expert Rear Axle Suspension Bush Removal Tool for Ford KA and Fiesta Vehicles

B>I>Expert Quality/I>/B>, rear axle suspension bush removal tool essential for the extraction and replacement of bushes. Can be used upon the vehicle when in situ removing the need to detach the suspension trailing. Suitable only for Ford KA and ...

Read on...

Automotive Tools Garage Workshop Tools Steering Suspens Tooled Up
Product
 

Draper Expert Rear Axle Bush Removal Tool for BMW X5 Series E53 Vehicles

B>I>Expert Quality/I>/B>, rear axle bush removal tool essential for the extraction and replacement of bushes. Can be used upon the vehicle with the axle in situ removing the need to detach the rear carrier assembly. Suitable only for BMW X5 serie...

Read on...

Automotive Tools Garage Workshop Tools Steering Suspens Tooled Up
Product